VISTA COMBI

This is the smallest, versatile and necessary inspecting machine that all the users have been expecting for years.
VISTA COMBI has an extremely reduced size, is user-friendly both when used as a meter-counting machine and piece cutting machine (it cuts at the length set by the operator).
It can work on weft-warp fabrics, as well as on knitted and stretched fabrics (excluding double and tubular fabrics).

Heading is automatic and a compensation cylinder electronically controls the tension applied to the fabric during handling
Roll density can be adjusted as well.
At the end of cutting operations you can recall the fabric unwound and wind up the cut piece.
Many optional devices are available, such as: multicolour substrate (patented system) on the inspecting panel – the operator can select the “lining effect” according to the type of fabric and colour, for a better visibility-, load cell weighting machine for finished rolls, fabric width measuring device.
Important feature: information on length, width and weight can be transmitted by serial line to a PC workstation.
The inspecting panel inclination can be adjusted through a system located on the side of the same panel.
Whenever you don’t need to inspect the fabric, you can switch the panel light off and operate the piece-cutting machine from roll to roll.

TECHNICAL CHARACTERISTICS:

WEIGHT 700 KG.
POWER SUPPLY 380 VOLT 3-PH + NEUTRAL + HEARTING
MAX. ROLL DIAMETER 50 CM
WORKING SPEED 0 TO 50 MT/MI

 
VISITA TESSUTI
IMBALLATRICI
TAGLIAPEZZE
  VISTA COMBI
  VTSZ
  VTSZ CM
   
ETICHETTATRICI
ACCESSORI
SW/HW
IMPIANTI SPECIALI
AZIENDA
e-mail Home
CTM Ilalia
ALLSIO DESIGN